TREAD Corporation | 540-982-6881 | 176 EastPark Drive, Roanoke, VA 24019, USA
TYPE II - OUTDOOR MAGAZINES
When your operation
requires storage of
explosive materials, the
TREAD series of
magazines are industry
recognized and respected
for its design features,
quality construction and
All TREAD Type II
Portable Magazines are
individually manufactured to meet
or exceed the rigid government
specifications established by the
Bureau of Alcohol, Tobacco and
Firearms as detailed in Title 27
Code of Federal Regulations,
Subpart K, Paragraph 555.208,
“Construction of Type II Magazines”;
MSHA, and IME
regulations and / or guidelines.
HOUSING – exterior and
doors are constructed of ¼”
hot rolled steel plate sourced
through American producers.
Features laser cut “tab
& slot” technology for
consistent fit at weldment.
Standard designed recessed door provides increased security versus a flat plate closure.
The formed steel doors provide greater strength. Drip protection is standard.
SKIDS – For ease of movement, the lead of each skid has a 45° bevel.
LINING – Interior is finished with optional thicknesses (minimum of 3” to 4”) of hardwood lining with the first inner layer securely bolted in place; and the final build up is then covered with ½” plywood.
HINGES & HASPS
The hinges are welded to the door and exterior of the magazine in compliance with the ATF directive.
All hinges are greased and standard with zerk fittings.
The hasps are protected with formed ¼” steel hoods that prevent sawing or lever action on the locks, hasps and staples per ATF construction guidelines.
VENTILATION – The vent cover is a one piece laser cut of steel and then formed. On the interior, stand-off strips are placed over the liner to prevent the packing of explosives against the wall and obstructing ventilation.
MOVEMENT / POSITIONING – To enable easy movement, each magazine has openings at the front and rear ends of the skids and lift rings are securely welded on the top for the attachment of chains or cables.
LIGHTNING PROTECTION – A Grounding Kit is optional.
LOCKS – BATF approved locks are available and can be keyed as required.
GENERAL – All outdoor magazines are bullet-resistant, fire-resistant, theft-resistant and constructed to prevent direct contact with the ground.
CAM LOCK CLOSURE - Steel rod with upper and lower latches provides a more secure closure when latched. Handle flip plate latch designed for an additional padlock.
GROUNDING STRAP - attached between the door and housing to protect against electrostatic discharge.
ATF License Renewal: Type II Outdoor Spec Sheet